unable to log into the admin settings on my Panoramic router
trying to log into my router but unable to get in i know the username is admin because when i tried to use user or user id or password in the admin spot it says that its not a user name but when i put in admin it tells me the password is wrong and with admin ive tried password, admin, user, userid dont know what else to try i didnt change it myself this is my first time logging into the router since i got it so i know it wasnt changed...
High-pitched sound from Cox Gateway
About a month ago, I switched to Cox as my internet service provider. The Cox technician installed a Technicolor CGM4140COM Panoramic Gateway here in the office next to my computer. From the start, the Gateway made a high-pitched humming or whirring sound when running. The sound was very distracting, and after a time when I was working here next to it, my right ear would feel discomfort or pressure. I called Cox to report the problem and was told I could go to the Solution Store and exchange the Gateway. I took it in and was given another CGM4140COM model. I hooked that one up, and it makes the same high-pitched sound as the original one. I now think the original one was not defective, but that all CGM4140COM Gateways make this sound. Have any of you experienced the same problem? If you have, do you have any tips or suggestions for how to remedy the problem? Thanks for your assistance.
is it possible to change the wifi channel on my panoramic wifi to one that is less crowded?
Hello, I'm reaching out to ask how I can change the wifi channel used by my panoramic gateway/router. I have been having a lot of internet stuttering and lag recently. I thought the problem might resolve itself after the scheduled outage for system work on 3/15/2022. it didn't, so i changed my plan to a higher tier thinking there were more neighbors paying more, and i was getting slower speeds to keep bandwidth available. that didn't change anything either. After doing more homework I was led to look at the channel my hardware uses for wifi. This seems like a likely cause for the problem. I am on a channel with 15 other users that show a strong connection. there are 5ghz that are unused and available. i found that i can get to an older java interface through a browser by pointing it to the gateway, but that app says channels are automaticallycontrolled. any advice would be appreciated. regards, chris
New Panoramic Wifi - Now Laptop Won't Print to Wireless Network Printer
I don't print from my laptop often, but I believe this problem started after I switched to the Cox Panoramic Wifi modem/router when I upgraded my internet package. Every other device I have switched over no problem and prints to the printer just fine. My lap top just won't.the printer status is "offline". I've restarted both devices several times. I've disconnected the laptop from the network and reconnected it. Printer troubleshooter says it cannot fix the problem. I printed some status reports directly from my printer, and the best I can get is that "a router/access point channel conflict has been detected". I googled that and logged in to the router settings but cannot find any area that lets me change the channel. The Cox Wifi app certainly does not let me change the router channel. Side note that may be related or not? - the Cox Wifi app also thinks my laptop is "not connected" even though it *is* connected and accesses the internet just fine. The Cox Wifi app does see the printer as connected, which makes sense since other devices can print. I've also tried reinstalling the printer, but it not surprisingly can't find it to be able to reinstall. Please help?Data Harvesting & Devices w/uPnP IP addy
When I see the proof of this Orwellian ** in my router logs, I wonder what the hell is going on...? So...what? How?? and Why??! And dude, what the hell is up with this strange 192.168.147.100 existence? Why can't I check it out and see what is on the page...if there is anything to see...? I'm curious. Lastly, thirdly, what is the difference between the DOCSIS/Ethernet choice given in the GUI?
