Forum Discussion
"Most routers should work if you set IPv6 to auto-configure. " - it isn't.
"It should detect DHCPv6 if set to Auto-detect" - it doesn't.
"Should also ask, what size prefix delegation are you requesting?" - I'm not "requesting" anything. Whatever they send, probably a /64
Can I please get an actual answer, not vague guesses? There are settings in there. I do not know what they should be. Can someone just tell me what settings have to be applied to make this work on Cox?
- WiderMouthOpen2 years agoEsteemed Contributor
Going to need more data from your side on what exactly those different settings are. Can you upload a screenshot? Also, you could be a tad nicer. All we can do is guess since none of us have your exact modem/gateway.
- jnojr2 years agoNew Contributor II
- jnojr2 years agoNew Contributor II
The settings are Disabled, Auto Detect, 6to4 Tunnel, Pass Through, Fixed, DHCP, PPPoE, Auto Config, and 6rd Tunnel. Probably the same as every other Netgear router... I didn't build my own.
There is going to be one right answer. If someone has that answer, I'd appreciate their sharing it. But saying "It should work" when t doesn't isn't helpful.- Darkatt2 years agoHonored Contributor
Set it for DHCP and change your LAN setup to autoconfig.
Besides if you look at your router's IPv6 address on WAN, you will see COX provided an IPv6 address to you, turn your LAN to auto config.
Related Content
- 9 years ago
- 8 years ago
- 2 years ago
- 6 years ago
- 10 years ago