Forum Discussion
- bearone2Contributor III
you can't trust the guests??
- DepoitNew Contributor
Really?! If you are this trusting, then I bet your home network has an easy password that can be penetrated in minutes. That is not a wise thing to do when there are programs that make it easy for hackers to steal info. Your "guest" may be ok, but what about your neighbors or their "guests". I would not be so foolish if I were you. But to each their own.
- Fairy-RiderNew Contributor
Try connecting your secondary network router to your primary cable modem that has wifi enabled. However; you need to buy your own router. You can connect a 3rd party wiress router to your modem with an eithernet cable.
Here's how I set up my guest wireless network:
First, I reset my Linksys router what I've currently own. I logged into my router and configure my wifi router to create a wifi name and password. For this instance; examplename_guests. I usuallyset my guest wifi with a password for public use. I use WPA2/PSK to secure a guest wifi network.
Next, I test the guest network to confirm is an internet signal is present. Once the internet is accessed, the guest network is ready to use.
Things you'll need:
- Your own wifi router to be configured for guests
- A primary cable mobem to connect your wireless router to
- An eithernet cable
- Your computer connected to a roughter being configured for setting up a guest wifi.
Note:
If you have wireless routers cascaded around your home, and you configured each router to have a same name and password; you might need to add a dedicated router for guests, rather than a standard internal guest wifi setup with each router. If you have a spare eithernet port on your modem; use it. Even setting up a guest wifi for non-subscribers always help.
- TurboJeffy86New Contributor
I'm on pano gateway
- Fairy-RiderNew Contributor
I do have a panoramic wifi modem too, but I used these ethernet ports to daisy chain my secondary router.
Here's what I did:
First, I configured my unused Linksys wifi router.
Next, I attach an ethernet cable to my panoramic router's WAN ports below 2 phone jacks.
Next, I test my secondary network to confirm if my router is working.
Next, I tested my guest network what I've implemented. I set my secondary router name with a "Guests" suffix after an underscore symbol.
I replaced my Linksys's firmware with DDWRT to get the most from my router.
I've also set my router to a specific location of my apartment.
Do you really have a secondary router what you can use to expand your network.
Related Content
- 4 months ago
- 6 months ago
- 5 years ago