random disconnects from a single application
My girlfriend and I use a program called Second Life. Cox internet has always been stellar for performance. Recently we got an upgraded router and suddenly we are having problems.
I recently got a ...
Forum Discussion
Nothing special from Cox but perhaps something special your old router was doing. First see if UPnP will do the trick. See here on how to enable that. If that doesn't work, disable it and use port forwarding instead. See here on how and here are the ports
- Open outbound access for TCP ports - Second Life servers do not establish inbound TCP connections to client systems running the Second Life Viewer software. Instead, they use the "request / response" message pattern. Enable outbound TCP access for ports 53, 80, 443, 12043, 12046 and 21002.
- Open outbound "session" access for UDP ports- Although UDP is a session-less transport, many firewalls block unsolicited incoming UDP traffic to a particular port unless it has seen recent outgoing UDP traffic from that same port. Activate outbound UDP for ports 53, 3478, 3479, 5060, 5062, and 12000-29999.
If you can't get that to work, see if there is a firewall setting you can adjust. Finally, you can always connect direct to the modem, reboot the modem and try a game then. If you get disconnects then, it's not a router issue.
Thanks for the awesome advice! I hope this works
The more I look, the more it seems port forwarding isn't needed but port triggering of some kind. You don't need the traffic forwarded to a specific PC, but rather open the firewall for all the computers on your network. See here for triggering instructions.
I read up on it and it looks like port triggering would help with connection stability. I'm stuck on the outbound port number though. I can't provide a range of ports like I can with port forwarding. I need one port number and I don't know what to use.
Okay I set up port triggering. I set up a rule for every one of the ports listed except for the range (12000-29999) since I need a single outbound port number to trigger it. That one should not matter though since it just handles voice.
Waiting now to see if I get disconnected. Wish me luck!
