Forum Discussion
The first thing I'd do with your levels is eliminate your house wiring completely. Get a brand new piece of RG6, go to your demarc and attach that brand new piece of RG6 directly to the line coming from the curb (there should be a bonded bullet connection there). Then hook the other end of that RG6 directly to your modem. Then hook a computer directly to the modem with a known good piece of network cable (Cat6, Cat5E, etc). Then check your levels. If they're still garbage, it's a Cox problem, if your levels look good, it's your house wiring.
There is hardly any changes. Like I said, I've done everything I can on my end.
- Artyjaimes4 years agoNew Contributor II
I hope cox can send an experienced technician this time.
- Dave94 years agoContributor III
Those levels are definitely out of spec. Way too low. If you hooked directly up to the demarc and still got those same low levels then you need a tech. Ask the tech what the levels are at the demarc. If you don't know how to interpret the numbers then write them down and post here. Unfortunately most techs only do what their handheld troubleshooting tools tell them to do and don't really understand the network so sometimes you have to call more than once before you get someone who understands how to fix it.
- Bruce4 years agoHonored Contributor III
Show the tech your logs and express your concern about the power levels (dBmV). Downstream would be from Cox to your address. I've read (rule-of-thumb) +/- 15 is "good" as opposed to best. Signals aren't weak or strong...but within a spec. Ask the tech what your spec range should be for gigabit service.
- Artyjaimes4 years agoNew Contributor II
I'll have to call again then, hopefully the tech can understand. Can someone post logs of what normal levels should look like? so that i can show the tech. Thank you.
Related Content
- 10 years ago
- 9 years ago
- 4 years ago
- 11 years ago