HD Homerun Prime only receiving ClearQAM
Hello all, I have read through some of these posts and I think I have an issue that I could definitely use some help with. I am able to receive Clear QAM from Cox in San Diego. I cannot get anything else. Here's my status messages for my problem. I just don't see what the problem is though. Please help. Summary Card Authentication success Card OOB Lock success Card Activation success Tuning Resolver ready Tuner 0 Channel 489.000 MHz Tuner 1 Channel 999.000 MHz Tuner 2 Channel none System Status Hardware Model HDHR3-CC Firmware Version 20130328 DTCP-IP DTCP 1.7-SD20130219 WMDRM-NDT WMDRM 10-SD20130219 Memory Report 64 MB SDRAM, 2 MB Flash Power Status Active Boot Status Booted Device ID 13163513 MAC Address 00:18:DD:31:63:51 IP Address 192.168.1.127 Subnet Mask 255.255.255.0 CableCARD Status Card Manufacturer Cisco Card Authentication success Card Activation success 3DES encryption supported OOB Frequency 74.250 MHz OOB Lock 1.544 Mbps Signal Strength 100% (0.5 dBmV) Signal Quality 100% (33.9 dB) Channel List tuning-resolver Tuning Resolver Status Authentication success Downstream success Upstream success Operational Status ready User Inactivity 6 minutes Tuner 0 Status Virtual Channel 2 USA Frequency 489.000 MHz Program Number 7 Authorization unspecified CCI Protection none CGMS Protection none Modulation Lock qam256 PCR Lock none Signal Strength 95% (-3.5 dBmV) Signal Quality 100% (36.2 dB) Symbol Quality 100% Streaming Rate none Resource Lock 192.168.1.115 Log 19700101-00:00:00 System: reset reason = headend reset command 19700101-00:00:00 CableCARD: USB device 05A6:0008 connected 19700101-00:00:00 CableCARD: Tuning Resolver connected 19700101-00:00:01 CableCARD: M-CARD inserted 19700101-00:00:01 CableCARD: Tuning Resolver downstream status: success 19700101-00:00:01 CableCARD: Tuning Resolver upstream status: success 19700101-00:00:01 CableCARD: Tuning Resolver authentication status: in progress 19700101-00:00:01 CableCARD: Tuning Resolver operational status: initializing 19700101-00:00:02 CableCARD: Tuning Resolver authentication status: success 19700101-00:00:02 CableCARD: Tuning Resolver operational status: ready 19700101-00:00:03 System: network link 1000f 19700101-00:00:04 System: ip address obtained: 192.168.1.127 / 255.255.255.0 19700101-00:00:06 CableCARD: Cisco card (0103:0001) 19700101-00:00:11 CableCARD: authentication status: authentication in progress 19700101-00:00:11 CableCARD: authentication status: authentication success, activation success 20140123-05:21:09 CableCARD: time changed from Thu Jan 01 00:01:46 1970 to Thu Jan 23 05:21:09 2014 Please look through all of this and let me know what you think. I'm stumped. Been on the phone all day with Cox and they have been helpful, but they are stumped too, I think.Solved5.4KViews0likes7Comments
The 5th HDHomeRun Prime CableCARD Authorization Problem
Cox must have a wealth of bad CableCARDS. I have a HDHomeRun Prime setup with both Media Portal and MythTV and neither can tune-in encrypted channels. ClearQAM channels come in fine. I have gone thru 2 cablecards and 2 tuning adapters but still no luck. A COX technician spent 4 hours at my home and accomplished nothing. I have read other posts on this forum and I am concluding that my problem is 1) a bad cablecard, or 2) a bad COX setup. The HD HomeRun Prime setup all looks good. The system log of the network cable adapter shows that I "subscribe" to the channels that I can not tune in. Media Portal testing on the channels that can not be tuned give me two types of error messages: 1) NO PMT found, or 2) Unknown error. I can not figure out the MythTV logs. But that system crashes when I tune to an encrypted channel. I am in the COX Phoenix, AZ market. Any suggestion will be appreciated.Solved4.6KViews0likes4CommentsCox has put DRM on all channels in Tulsa AGAIN
Six months ago, my Silicon Dust home Run stopped working on most channels because COX had suddenly flagged all channels with DRM except the locals A week after I queried this, things went back to normal. Now it's happened again. This is very frustrating. I can't see that its official policy because, if it was, they wouldn't change them back? But if its not official policy WHO keeps messing with the DRM settings every few months? Please change them back again. MH Tulsa685Views0likes0Comments
Cox has put DRM on all channels in Tulsa AGAIN
Six months ago, my Silicon Dust home Run stopped working on most channels because COX had suddenly flagged all channels with DRM except the locals A week after I queried this, things went back to normal. Now it's happened again. This is very frustrating. I can't see that its official policy because, if it was, they wouldn't change them back? But if its not official policy WHO keeps messing with the DRM settings every few months? Please change them back again. MH Tulsa